Skip to content
Mathmarkets
Mathmarkets
  • Home
  • About
  • Company Analysis
  • Industry Analysis
  • Knowledge Bytes
  • Contact
Mathmarkets

The Quiet Giants of Motion: Inside India’s Bearings Industry and the Making of SKF Industrial

chintan, November 21, 2026

The part you never see

Look around you right now. The ceiling fan overhead, the fridge humming in the kitchen, the scooter parked downstairs, the train rattling past on the suburban line. Every one of them depends on a small, polished, almost invisible component: the bearing.

A bearing does one deceptively simple job. It lets something spin or slide while carrying a load, with as little friction as possible. Without it, shafts would grind, wheels would seize, and turbines would tear themselves apart.

In India, bearings are a roughly ₹29,000 crore opportunity across automobiles, fans, tractors, wagons and wind turbines. A bearing can cost ₹50 or ₹25 lakh. And in October 2025, one of the most storied names in the business, SKF, split its Indian operations in two, creating a pure-play industrial company: SKF India (Industrial).

This note walks through the industry from the ground up, then zooms in on that new company. No stock tips, no price targets. Just how the business actually works, and why it is more interesting than it looks.

A 2,000-year-old idea

The bearing is older than most people think. Roman engineers fitted rotating platforms on Emperor Caligula’s giant pleasure ships on Lake Nemi, around 40 AD, using bronze-mounted wooden balls and rollers. Around 1500, Leonardo da Vinci sketched ball bearings in his notebooks, worrying about balls rubbing against each other, a problem engineers still design around today.

The modern industry, though, is a story of three inventors and the companies they started:

  • Timken (USA, 1899). Henry Timken was a carriage maker who got tired of wagon axles wearing out. His answer was the tapered roller bearing, which handles weight from the side and the front at the same time. It is still Timken’s signature product.
  • SKF (Sweden, 1907). Sven Wingquist, an engineer at a Swedish textile mill, kept seeing bearings fail because the mill’s shafts sagged out of line. He invented the self-aligning ball bearing, and SKF was born in Gothenburg. A fun aside: Volvo started life in 1926 as an SKF subsidiary. The name is Latin for “I roll”.
  • Schaeffler (Germany). Its FAG brand traces back to Friedrich Fischer, who built a machine in 1883 that could grind steel balls to near-perfect roundness. That machine made mass-produced ball bearings possible.

How strategic are bearings? During the Second World War, Allied bombers repeatedly targeted Schweinfurt in Germany because it held most of the country’s bearing factories. Planners reasoned that without bearings, tanks, aircraft and trucks would simply stop. More than eight decades later, the same logic applies to railways, wind farms and factories.

Bearings 101, in two minutes

Every bearing deals with two kinds of force. Radial load pushes at right angles to the shaft, like the weight of a spinning shaft pressing down on its supports. Axial (thrust) load pushes along the shaft, like the force on a wheel hub as a car corners. Most design choices come down to which of the two dominates.

That gives us three broad families:

Family Share of global revenue What it is good at
Roller bearings ~43% Heavy loads, industrial duty. Sub-types: tapered, cylindrical, spherical, needle
Ball bearings ~40% Lighter loads, high speeds. Over half of all bearings sold by unit count
Plain, slewing, magnetic and others ~17% Slow or oscillating motion, giant wind-turbine slewing rings, niche high-value uses

The humble deep-groove ball bearing deserves a special mention. It alone makes up more than half of all bearing units sold worldwide. Rollers, though, earn more money because each one carries more value.

Within rollers, the big three global players have quietly divided the territory, each anchored in a type it pioneered:

Roller type Typical use Category owner
Tapered (TRB) Wheel hubs, railway axles, machine spindles Timken (inventor)
Cylindrical (CRB) Gearboxes, heavy machinery, high speeds Schaeffler
Spherical (SRB) Conveyors, crushers, kilns, misaligned shafts SKF
Needle Transmissions, small engines Many, including NRB in India

Tapered and needle rollers are the fastest-growing types. Ball bearings grow slowest in percentage terms but still add the most dollars, simply because the base is so large.

The global picture: a $145 billion spinning economy

Most broad research estimates put the global bearings market at roughly $143–146 billion in 2025–26, growing at about 9–10% a year. Narrower definitions land as low as $50 billion, so the direction of travel is more reliable than any single number.

A few patterns hold across every source:

  • Asia-Pacific is the centre of gravity, with roughly 41–49% of global demand, led by China, then India, Japan and South Korea.
  • Automotive is the single largest buyer, at about 40% of demand. Industrial follows at ~32%, and railway plus aerospace (~11%) is the fastest-growing slice at 10–12% a year.
  • New equipment dominates, but replacement grows faster. Roughly two-thirds of industrial bearings go into new machines (OEM). The other third is aftermarket, growing near 9.7% a year as factories shift to predictive maintenance.

That OEM share is remarkably sticky. Before a bearing goes into a car platform or a gearbox, it goes through months or years of qualification. Once approved, it usually stays for the life of that product. Switching suppliers is slow, costly and risky, which is why incumbents rarely lose a platform once they win it.

India: small share, big momentum

India’s bearings market is roughly $2.9 billion in FY26, about 3.8% of the global total, or ₹17,000–18,000 crore. Estimates range from $2.2 billion to $6.7 billion depending on whether you count only organised ball and roller bearings or also include plain bearings, mounted units and the informal sector. A wider bottom-up count of demand across six end-uses, OEM plus replacement, comes to about ₹29,000 crore (~$3.5 billion).

The market has grown about 10% a year over the last five years, and most forecasts put the coming years at 9–15%.

Who supplies it

  • Organised players, about 75–80%. Listed companies and multinationals with OEM relationships, quality certifications and structured distribution.
  • Unorganised players and direct imports, about 20–25%. Small local makers and low-cost imports, concentrated in commodity ball bearings and the replacement market.

The trade story

India imports $1.2–1.4 billion of bearings a year, about 45% of it from China, and imports still meet around 40% of domestic demand. Exports are about $900 million, mostly mid-spec bearings and components, with the US, Germany and China taking nearly half.

The cost gap explains why global companies care. Employee costs are about 10% of sales in India against roughly 25% in developed countries. That single fact sits behind much of what follows in this note.

Where the ₹29,000 crore goes

End-use Share Approx. size
Automotive (2W, PV, CV, 3W) 48% ₹14,000 Cr
Electrical and electronics 24% ₹7,000 Cr
Agriculture 11% ₹3,200 Cr
Wind energy 7% ₹1,936 Cr
Construction and mining 6% ₹1,700 Cr
Railways and aerospace 4% ₹1,300 Cr

The split is close to even: about 48% automotive and 52% industrial.

A tour of India’s bearing demand

The most striking thing about this industry is the range of value per unit. A ceiling fan carries about ₹50 of bearings. A wind turbine carries ₹25 lakh or more. That is a 50,000-fold spread, and it explains why a few thousand turbines can matter as much as millions of fans.

Product Bearing value per unit
Wind turbine ₹25,00,000+
Excavator (20–30 tonne) ₹4,00,000
Backhoe loader ₹1,75,000
Freight wagon ₹1,50,000
Tractor ₹7,500
Ceiling fan ₹50
Mixer grinder ₹30

Railways: about ₹1,100 crore a year

India built 41,929 freight wagons and 7,134 passenger coaches in FY25, each with eight bearings, mostly tapered roller units. New production is worth about ₹747 crore and replacements about ₹350 crore. The wagon fleet is planned to double from 3 lakh to 6 lakh by 2030, a ₹40,000 crore wagon tender is in the pipeline, and 800 Vande Bharat sets are planned. The segment could reach ₹1,800–2,200 crore by FY30.

This is Timken’s stronghold, with 50–65% share, followed by NEI/NBC (15–20%), Schaeffler (10–15%) and SKF (8–12%). Strict railway approvals keep low-cost imports out.

Wind energy: about ₹1,936 crore in FY26

India added a record ~6 GW of wind capacity in FY26, up from 1.8 GW in FY22, and targets 100 GW by 2030 from 56 GW today. Every gigawatt needs about ₹320 crore of bearings, adding up to a ₹13,600 crore opportunity over five years. Offshore wind is still nascent. A single offshore main-shaft bearing can cost $180,000–350,000, more than many houses.

Agriculture: about ₹3,200 crore a year

India is the world’s largest tractor market. It produced 12.6 lakh tractors in FY26, each with 25–35 bearings, and crossed 10 lakh retail sales for the first time. With about 1 crore tractors already working the fields, replacement makes up 62% of the segment, because mud, dust and heavy loads wear bearings quickly. NBC/NEI is the dominant supplier with 50–60% of tractor OEM demand and 550+ rural stockists.

Electrical and electronics: about ₹7,000 crore a year

This is the largest segment by volume. Every electric motor needs at least two bearings, and India makes 65 million ceiling fans, 50 million small motors, 35 million fridges and ACs and 20 million pumps a year. In all, about 600 million bearings go into new appliances, worth ~₹4,000 crore, with another ~₹3,000 crore in replacements. Over 500 million ceiling fans are spinning in Indian homes right now. Insulated bearings for EV motors are an emerging premium niche.

Construction and mining: about ₹1,700 crore a year

An excavator uses 60–100 bearings, including a slewing ring that alone can cost ₹80,000–2 lakh. The hidden giant is mining process equipment: conveyors, crushers and ball mills account for ~₹800 crore. This is the most evenly contested segment, split between Timken, SKF, Schaeffler, NBC and Chinese suppliers.

Aerospace: a greenfield

No Indian company makes aerospace-grade bearings at scale today, so the market is entirely imported. Barriers are steep: specialty vacuum-melted steel, certified heat treatment and qualification aircraft by aircraft. NBC/NEI, through its Kinex acquisition in Slovakia, is the most advanced Indian entrant. The opportunity is estimated at ₹200–500 crore a year, small in volume but high in margin.

The economics: why industrial is the prize

Industrial earns far more than automotive

The sharpest illustration comes from SKF’s own global numbers for 2025. Industrial made up about 73% of sales but 96% of adjusted operating profit. Automotive brought in 27% of sales and just 4% of profit.

Company (FY25, global) Industrial operating margin Automotive operating margin
SKF Group 16.1% 4.1%
Schaeffler (Bearings and Industrial vs group) 7.5% 4.0%
Timken (engineered bearings) 17.0% 14.0%

Car makers buy in huge volumes and negotiate hard. Industrial customers buy engineered, application-specific bearings where reliability matters more than the last rupee. That gap is exactly why SKF decided to separate its automotive business, and India was the first country to do it.

Tiny cost, enormous consequence

Bearings make up just 0.15–0.6% of a typical industrial plant’s operating costs. Yet a single bearing or gearbox failure on an onshore wind turbine can cost $250,000–300,000 in cranes, repairs and lost power. A worn bearing can also push a motor’s energy use up by 8–15%.

Here is a worked example. Suppose a premium bearing costs ₹3–4 lakh more than a standard one, and one failure costs ₹2.2 crore. If the premium bearing cuts the yearly failure probability from 5% to 4%, it saves ₹2.2 lakh a year on average. It pays for itself in under two years on an asset that runs for 15–20 years.

This asymmetry shapes how the industry sells. Prices in critical applications are tied to the downtime they prevent, not to the cost of the steel. It is also why condition monitoring and predictive maintenance sell so well alongside the bearing itself. For a tractor or a general-purpose motor, where failures are cheap and quick to fix, a standard bearing and good maintenance is often enough.

Aftermarket: the real moat

Replacement demand is tied to the installed base of machines, not to this year’s new orders, so it is steadier and more profitable.

  • Schaeffler’s aftermarket division (Vehicle Lifetime Solutions) earns a 14.8% EBIT margin, its highest.
  • SKF has 17,000+ distributor locations across about 130 countries.
  • India’s organised aftermarket is growing at 14–15% a year, against mid-single-digit growth for OEM supply.
  • Remanufacturing is growing at about 7.8% a year, and all three majors are investing in it.

A distribution network takes decades to build. Stockist relationships, monitoring contracts and lubrication programmes create switching costs that a newcomer cannot copy quickly.

India: from market to manufacturing hub

Here is a surprise: the Indian arms of the global majors are often more profitable than their parents.

Company Global margin (as reported) India EBITDA margin India premium
SKF 11.0% 16.0% +5 pts
Schaeffler 7.5% 19.6% +12 pts
Timken 17.4% 22.2% +5 pts

Some of the gap is mix. Schaeffler’s global number includes a loss-making e-mobility division that India does not have. Some of it is cost, as Indian plants run cheaper. And some of it is timing, as new plants and export margins can move the numbers either way.

The interesting part is that margins, exports and capital spending are all pointing the same way:

  • SKF India has pushed localisation above 95% in its automotive business and is investing ₹410–510 crore by 2030 across Haridwar, Pune and Bengaluru.
  • Schaeffler India’s intercompany exports jumped 49% year on year in Q4 2025. Exports are about 16% of sales, and a new plant is coming up at Shoolagiri.
  • Timken India saw a sharp rise in exports drive its Q4 FY26 growth, and its new Bharuch plant is ramping towards 70% utilisation.

Five trends shaping the next five years

  1. Railways. The wagon fleet is set to double to 6 lakh by 2030. The shift to LHB coaches has moved demand from spherical to tapered roller bearings.
  2. Wind. Capacity is set to climb from 56 GW to 100 GW, with offshore wind as an untouched, import-dependent frontier.
  3. Electric vehicles. EVs were 8.5% of India’s vehicle sales in FY26. They need new e-axle and motor bearings but fewer transmission bearings, so the effect is mixed but lasting.
  4. Make in India. Imports meet ~40% of demand today, and that share is falling. Production-linked incentives worth about $24 billion reward local scale, and India can now make bearings up to 1,200–1,500 mm in diameter.
  5. Organised aftermarket. India has 340 million+ registered vehicles and an ageing fleet. Organised replacement is growing at 14–15% a year.

What to keep in mind

The industry has real headwinds too. Timken India’s return on capital employed slid from 29.9% in FY22 to 20.9% in FY26, as material costs rose 10.3% in a year. Chinese imports keep pressure on replacement prices. And demand still follows capital spending, vehicle production and infrastructure budgets, all of which can turn quickly.

Spotlight: SKF India (Industrial)

SKF has been in India since 1923, more than two decades before Independence. In October 2025, SKF India demerged its industrial business into a separate company, which listed in December 2025. The old listed entity, SKF India Ltd, kept the automotive business. India went first. SKF is now separating its automotive arm globally as well, under the name SKF Vertevo.

The result is a company with no car-maker exposure at all. It sells only to factories, mines, railways, wind farms, farms and the distributors who serve them. SKF AB of Sweden owns 52.6%.

The first year at a glance (FY26, April 2025 to March 2026)

Metric FY26
Revenue ₹3,440 crore
EBITDA margin (reported) 13.0% (11.3% excluding other income)
Profit after tax ₹218 crore, after ₹196 crore of one-time demerger costs
Return on capital employed 28.2% (before exceptional items)
Debt Zero
Bearings produced 60 million

What it sells

SKF Industrial sells a broad catalogue from a single factory in Pune with capacity for 63.5 million bearings a year, plus 120+ distributors serving 40+ industrial segments. The range covers:

  • Bearings and units: deep-groove ball, spherical roller, tapered roller, cylindrical roller, mounted units and railway TBUs (tapered bearing units)
  • Seals and lubrication systems, including RecondOil, which cleans industrial oil so it can be reused
  • Condition monitoring: sensor-equipped bearings and AI diagnostics that warn before a machine fails
  • Reliability engineering and rotating-shaft services
  • Remanufacturing: 24,485 bearings refurbished in FY26

Services, remanufacturing and monitoring together are only about 6–7% of sales. Integrated projects, however, earn margins of 25% or more.

One home-grown highlight: a solid-oil mining bearing developed in India is now being used by SKF around the world.

Where the revenue comes from

By end-industry (Q1 FY27):

End-industry Share of sales
General machinery 26%
Railways 20%
Wind 16%
Agriculture and electrical 15%
Heavy industry (cement, mining) 12%
Metals 11%

By channel:

Channel FY26 Q1 FY27
OEM (equipment makers) 51% 54%
Distribution 35% 34%
Exports 6% 12% (incl. sales to SKF India Auto)
Sales to SKF India (Auto) 4% —

The channel mix matters a great deal. According to the CFO, distribution earns high double-digit margins, while OEM sales earn high single digits. When OEM share rises, as it did in Q1 FY27, reported margins dip even if the business is growing.

Recent order wins give a feel for the work: a ₹140 crore one-year wind gearbox supply contract, ₹35 crore and ₹32.5 crore tractor programmes, suburban rail TBUs, and trials on Vande Bharat trains.

The quarterly journey

Quarter Revenue (₹ Cr) Change QoQ PBT (₹ Cr) PAT (₹ Cr)
Q1 FY27 (Apr–Jun 2026) 970.8 +2.6% 86.9 61.9
Q4 FY26 (Jan–Mar 2026) 945.7 +9.8% 90.0 119.0
Q3 FY26 (Oct–Dec 2025) 861.0 +5.9% (67.1) —
Q2 FY26 (Jul–Sep 2025)* 813.1 −0.9% 101.4 —
Q1 FY26 (Apr–Jun 2025)* 820.6 — 97.1 71.9

*Carved out by management from SKF India Ltd. Q3 FY26 includes a ₹180 crore demerger charge for IT separation, stamp duty and land transfer. Q4 FY26 profit was helped by tax credits.

Revenue rose about 18% between Q1 FY26 and Q1 FY27. The reported PBT margin of 9.0% in Q1 FY27 was weighed down by two temporary items: about ₹14.7 crore of currency losses on imports, as the rupee weakened during the Middle East conflict, and about ₹15 crore of IT separation costs, expected to last about two more quarters. Management puts the underlying margin near 12%.

A note on the record: some third-party reports said Q4 FY26 was a loss quarter. Company filings show Q4 FY26 PAT of ₹119 crore. The loss quarter was Q3 FY26, because of the demerger charge.

Inside the P&L: a trader becoming a maker

The most revealing number in the annual report is this: 53% of revenue comes from traded goods, bearings bought rather than made. About 28% of revenue (₹974 crore) is finished goods imported from other SKF entities.

FY26 ₹ Cr % of revenue
Revenue 3,440 100%
Materials and traded goods 2,324 67.6%
Employee cost 215 6.3%
Other expenses (incl. royalty, trademark, IT) 511 14.8%
Operating EBITDA 390 11.3%
Other income 59 1.7%
PBT before exceptional items 417 12.1%

The company paid ₹74 crore to the SKF Group in FY26: ₹15 crore in royalty, ₹10 crore for the trademark and ₹48 crore for IT. Shareholders have approved FY27 ceilings of up to ₹122 crore for royalty and ₹101 crore for the trademark. These are upper limits, not forecasts.

This cost structure explains why the rupee and localisation move margins more than sales volumes do.

Localisation: the central storyline

Measure Level
Portfolio made in India ~60%
Local procurement 78%
Company’s localisation target Up to 75%
Sister company SKF India (Auto) ~90%

The gap between 60% and SKF Auto’s 90% shows how far the industrial business could go. Progress is already visible:

  • Medium deep-groove ball bearings above 150 mm and mounted units, once imported, are now made in Pune.
  • The Pune tapered-roller line was upgraded from 6 lakh to 8.8 lakh pieces a year. Costs fell over 18%, changeover time fell 20% and new-product lead time fell 35%.
  • One more tapered-roller line is due in early 2027.
  • SKF is re-entering segments it had left on cost grounds: wind, rail freight and tractors.

The binding constraint is floor space, not machines. The factory runs at about 94% utilisation. Hybrid ceramic and data-centre bearings will stay imported until Indian volumes justify a local line.

The big build: a new Pune factory

SKF Industrial has committed ₹800–950 crore of capital spending through 2030:

Project Amount Timing
New Pune “Factory of the Future” ₹450–500 crore Operations mid-2028, full ramp end-2028
New ball and tapered-roller lines, distribution ₹350–450 crore 2026–2030

Management expects a payback of five to seven years. The plan is roughly 55–65% of the company’s FY26 equity of ₹1,477 crore, a substantial commitment for a one-year-old listed company.

This changes the shape of the business. Today, revenue is about 11 times fixed assets, because much of what it sells is traded and the existing plant is old and largely depreciated. As the new plant comes in, that ratio will fall sharply. Analyst estimates suggest return on capital could dip from about 28% towards 20% during FY28–30, before higher margins from local manufacturing come through.

What management has said about the road ahead

  • Revenue: about 8% growth a year until new capacity arrives in 2028, with an aspiration to roughly double the business in about five years.
  • Margins: PBT margin of about 12% underlying in the near term, rising to 14–16% and 15% by FY30, with an aspiration of 17–19%.
  • Localisation: up to 75%.
  • Services: growing faster than the core bearings business.

Guidance has shifted over time, from a pre-demerger reference of 16–19% to 14–16% at the AGM, then about 13% in the near term on the Q4 call.

The demand drivers line up with its sales mix. Public capital spending is budgeted to rise from ₹11.2 lakh crore in FY26 to ₹12.2 lakh crore in FY27. Railways have a record ₹2.78 lakh crore allocation. Wind added a record 6.05 GW. Tractor makers are building export hubs in India. Management expects steel, cement and mining capacity to roughly double by 2030. Data centres and robotics are small but emerging.

Leadership and ownership

Person Role
Sujeeth Pai Managing Director from 1 September 2026. 22 years with SKF, previously led manufacturing and supply chain for India, Southeast Asia and the Middle East
Mukund Vasudevan MD until 31 August 2026. Now heads SKF Industrial for India, Southeast Asia and the Middle East
Ashish Saraf CFO since October 2025
Gopal Subramanyam Independent Chairman. 30+ years at L&T

SKF AB holds 52.6%. Domestic institutions hold about 29%, foreign investors about 5% and the public about 13%. The board has two independent directors, both of whom also sit on SKF India Ltd’s board. Indian leaders now hold regional roles across Asia and the Middle East, a sign of India’s rising weight inside the group.

What to watch

  • Margin path: whether quarterly PBT margins return above 12% once IT separation and currency costs fade.
  • Channel mix: whether distribution recovers towards 35–38% of sales after Q4 FY26, when SKF cut supply to distributors with overdue payments.
  • The Pune plant: whether it stays on schedule for mid-2028, along with the interim tapered-roller line in early 2027.
  • Localisation: whether disclosed levels move towards 65–70%.
  • Group charges: how royalty and trademark payments move as a share of sales.
  • Currency: with about 28% of revenue imported, the rupee against the euro matters.
  • Leadership continuity: a new MD took over mid-build and mid-separation.

The rest of the cast

SKF Industrial does not operate alone. India’s top five or six players control about 60–70% of the organised market, and each has chosen its ground carefully.

Company FY26 revenue EBITDA margin Known for
Schaeffler India ₹9,200 Cr (CY25) ~18% Largest by revenue. Cylindrical rollers, auto OEMs, humanoid robotics
SKF India (Industrial) ₹3,440 Cr 13.0% Distribution, spherical rollers, condition monitoring
NBC (CK Birla, unlisted) ~₹3,550 Cr — Tractors, electrical, 550+ stockists, aerospace entry
Timken India ₹3,419 Cr 18.0% Tapered rollers, railways, exports
SKF India (Auto) ₹2,130 Cr 15.0% Wheel-end and EV drivetrain bearings

Timken India is the railway specialist, with 50–65% of rail bearings. Exports make up 21% of revenue. It deliberately stays out of commodity ball bearings. Its new Bharuch plant adds spherical and cylindrical roller capacity, and its Bengaluru engineering centre employs 500–600 engineers.

Schaeffler India has the broadest portfolio across three brands, FAG, INA and LuK, and four plants. About 55% of revenue is automotive. It is 78% localised and is investing about €500 million over five years, including large-diameter capability of up to 1,200–1,500 mm. Its most futuristic bet is humanoid robots, where actuators make up about half of a robot’s bill of materials.

SKF India (Auto) is the sister company left behind after the demerger. Its 15% margin is far above SKF’s global automotive business (1.7–4.1%). It runs at 63% capacity utilisation, so it has room to grow without new plants.

NBC / NEI is the fastest-growing major and the clear leader in high-volume, lower-value segments such as tractors and electrical motors. Its Kinex acquisition in Slovakia gives it a head start in aerospace.

Who leads where

Segment Timken SKF Schaeffler NBC / NEI Chinese
Railways Dominant Present Present Strong #2 Blocked
Wind Strong Strong Strong Weak Growing
Agriculture Present Present Present Dominant Aftermarket
Electrical Minimal Premium EV niche Dominant Strong
Construction and mining Strong Strong Strong Present Growing

No single company dominates everything. Timken leads where volumes are low and value is high. NBC leads where volumes are high and value is low. SKF Industrial’s distinctive ground is the industrial aftermarket, where its distributor network and reliability services do the heavy lifting.

The takeaway: small parts, big story

Three ideas hold this industry together.

  1. India’s ₹29,000 crore bearing market is split almost evenly between automotive and industrial. Automotive is larger as a single segment, but industrial applications such as railways, wind and mining carry more pricing power.
  2. Replacement is the quiet engine. Aftermarket demand is about 45% of the total, grows faster than new equipment, and rewards companies that have spent decades building distribution.
  3. The growth drivers are structural. Railway fleet doubling, wind’s march to 100 GW, farm mechanisation, electric vehicles, export sourcing and import substitution all play out over years, not quarters.

SKF India (Industrial) sits at an interesting point in this story. It is a century-old brand in a one-year-old corporate shell. It is still more trader than manufacturer, and it is building the factory meant to change that. Whether that shift unfolds as planned will become clear over the next three to four years, one bearing at a time.

Check more industry analysis here

 

Company Analysis Industry Analysis

Post navigation

Previous post

Related Posts

Company Analysis Chemicals

IOL Chemicals

March 11, 2021August 6, 2023

Business Model: IOL Chemicals makes APIs/ Bulk drugs which are used in pharma, ink, flexible packaging, adhesives, surface coatings, paints. The company is largest producer of Ibuprofen in the world with around 35% market share which has a market size of $580Mn and growing at 3% per annum. It is…

Read More
Company Analysis Analytics

Latent View analytics

July 2, 2022July 30, 2023

Introduction: Latent View analytics is a company founded in 2006 by Venkat Vishwanathan to provide analytics solutions to business problems. Their entire business comes from the digital side of IT services business (unlike most of the other Indian IT services companies) with almost complete focus on data engineering, analytics and…

Read More
Industry Analysis

Fundamental scores of companies

June 7, 2021June 20, 2022

 

Read More

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • The Quiet Giants of Motion: Inside India’s Bearings Industry and the Making of SKF Industrial
  • Aircraft fleet
  • India’s Workforce: The Complete Picture
  • India’s Natural Gas — The Complete Story
  • India’s oil supply chain

Subscribe to Math Markets

Loading

Archives

  • November 2026
  • April 2026
  • March 2026
  • December 2025
  • November 2025
  • September 2025
  • July 2025
  • March 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • June 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • November 2023
  • September 2023
  • August 2023
  • July 2023
  • May 2023
  • July 2022
  • June 2022
  • April 2022
  • September 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021

Categories

  • Company Analysis
  • Industry Analysis
  • Knowledge Bytes
  • Uncategorized
All the contents published on this blog and other tools offered are the property of Chintan Shah. All rights reserved. The information contained on this website and the resources available for download through this website are for educational and informational purposes only. The stocks discussed in this blog are the research and personal views of the authors should ‘not’ be considered as any kind of buy, sell or any advisory/recommendation.
©2026 Mathmarkets | WordPress Theme by SuperbThemes